Galvalume metal roof on a West Palm Beach home
Palm Beach County · Outside the HVHZ · roughly 168 mph

Roofing in West Palm Beach, FL

West Palm Beach is the northern edge of where we work, outside the HVHZ, with its own city Building Division handling permits.

The short answer

SkyGuard is a Florida Certified Roofing Contractor (license CCC1336668) working West Palm Beach and the rest of Palm Beach County. Rates are the same here as everywhere we work: shingle from $6, tile from $9, metal from $10, metal slate from $12 per square foot, so about $12,000 to $24,000 on a typical 2,000 sq ft roof. West Palm Beach sits outside the High Velocity Hurricane Zone, with design wind speeds of roughly 168 mph and product approval via Florida Product Approval.

What is different about roofing in West Palm Beach

The city runs its own Building Division

Permits go through the City of West Palm Beach Building Division rather than the county, and they can be reached on 561-805-6700. Roofing is not among the work exempt from permitting, so anyone telling you a reroof here can skip the permit is wrong.

The housing stock

A genuine mix: historic districts with tile and metal, mid-century neighbourhoods on shingle, and newer construction across the western suburbs. Being outside the HVHZ widens the product range available, though we tend to spec to the higher standard regardless.

How West Palm Beach compares with the rest of our service area, Risk Category II buildings.
LocationZoneDesign wind speedProduct approval
West Palm BeachOutside HVHZroughly 168 mphFlorida Product Approval
Miami-DadeHVHZ175 mphMiami-Dade NOA
BrowardHVHZ170 to 175 mphMiami-Dade NOA
Palm BeachOutside HVHZ150 to 170 mphFlorida Product Approval

What we install in West Palm Beach

SkyGuard published rates, per square foot of roof area. Excludes deck replacement, permit fees and tear-off beyond one layer.
MaterialRateLifespanBest for
Architectural shingle$6/sq ft25 to 30 yearsLowest entry cost. Best value on simple, low-slope-to-moderate roofs.
Concrete or clay tile$9/sq ft40 to 50 yearsMatches most South Florida HOA and Mediterranean architecture.
Standing seam metal$10/sq ft40 to 70 yearsBest lifetime value. Reflective finishes cut cooling load.
Metal slate$12/sq ft50+ yearsSlate look with metal weight and metal wind performance.

Roof area is not floor area: pitch and overhang usually make a roof 10 to 25 percent larger than the square footage on your appraisal. Full cost guide, including permit fees and the 25% rule.

What our customers say.

5.0★★★★★161 Google reviews
★★★★★

"He was prompt, professional, and gave me an on-the-spot quote. The crew efficiently removed the old roof and installed the new one with great care, leaving everything spotless."

Chuy pedraza Google review
★★★★★

"Outstanding experience from start to finish. They communicated clearly throughout the process, finished on time, and left everything clean."

Karla DeVillo Google review
★★★★★

"SkyGuard replaced my shingle roof, including some rotten decking that was causing a leak. My roof is now in perfect condition!"

Nicola Pinnock Google review

Common questions.

How much does a new roof cost in West Palm Beach?+

SkyGuard publishes flat rates that apply in West Palm Beach the same as everywhere else we work: architectural shingle from $6 per square foot, concrete or clay tile from $9, standing seam metal from $10, and metal slate from $12. On a typical 2,000 square foot roof that is $12,000 for shingle and $20,000 for metal, before deck replacement and permit fees.

Do I need a permit to replace a roof in West Palm Beach?+

Yes. Roofing is not exempt anywhere in Palm Beach County, and an unpermitted roof will surface at your next sale or insurance inspection. We pull it through the City of West Palm Beach Building Division as the licensed contractor of record under license CCC1336668, and the fee is itemised on your quote.

Is West Palm Beach in the High Velocity Hurricane Zone?+

No. West Palm Beach is in Palm Beach County, which sits outside the HVHZ. Design wind speeds run roughly 168 mph and product approval is via Florida Product Approval rather than Miami-Dade Notice of Acceptance. We generally install Miami-Dade approved assemblies here anyway because they exceed what is required.

How long does a roof replacement take in West Palm Beach?+

Two to five working days on site for most single-family homes, with shingle fastest and tile or metal slate slowest. Add the permit ahead of that, typically 5 to 14 business days, so plan on two to three weeks end to end.

Free roof inspection in West Palm Beach

We measure the roof, photograph what we find, and give you an itemised written quote with the deck rate and permit fee stated up front.