Roofing in Davie, FL
Davie is one of the areas our customers name directly. One of our Google reviews is specifically a Davie shingle roof where rotten decking was causing a leak.
The short answer
SkyGuard is a Florida Certified Roofing Contractor (license CCC1336668) working Davie and the rest of Broward County. Rates are the same here as everywhere we work: shingle from $6, tile from $9, metal from $10, metal slate from $12 per square foot, so about $12,000 to $24,000 on a typical 2,000 sq ft roof. Davie sits inside the High Velocity Hurricane Zone, with design wind speeds of 170 to 175 mph and product approval via Miami-Dade NOA.
What is different about roofing in Davie
Large lots, and decking that has been wet longer than anyone realised
Davie has more big-lot, low-density housing than most of Broward, much of it single-storey with long uninterrupted roof planes. Long runs are straightforward to re-roof, but they also mean a slow leak can travel a long way through the deck before it shows up on a ceiling. On Davie jobs we budget more carefully for deck replacement and we always agree the per-sheet rate in writing first.
The housing stock
A mix of ranch-style homes on acreage, equestrian properties, and newer subdivision development to the south and west. Plenty of ageing shingle, which is the material most exposed to South Florida sun over a 25 to 30 year life.
| Location | Zone | Design wind speed | Product approval |
|---|---|---|---|
| Davie | HVHZ | 170 to 175 mph | Miami-Dade NOA |
| Miami-Dade | HVHZ | 175 mph | Miami-Dade NOA |
| Broward | HVHZ | 170 to 175 mph | Miami-Dade NOA |
| Palm Beach | Outside HVHZ | 150 to 170 mph | Florida Product Approval |
What we install in Davie
| Material | Rate | Lifespan | Best for |
|---|---|---|---|
| Architectural shingle | $6/sq ft | 25 to 30 years | Lowest entry cost. Best value on simple, low-slope-to-moderate roofs. |
| Concrete or clay tile | $9/sq ft | 40 to 50 years | Matches most South Florida HOA and Mediterranean architecture. |
| Standing seam metal | $10/sq ft | 40 to 70 years | Best lifetime value. Reflective finishes cut cooling load. |
| Metal slate | $12/sq ft | 50+ years | Slate look with metal weight and metal wind performance. |
Roof area is not floor area: pitch and overhang usually make a roof 10 to 25 percent larger than the square footage on your appraisal. Full cost guide, including permit fees and the 25% rule.
What our customers say.
5.0★★★★★161 Google reviews"He was prompt, professional, and gave me an on-the-spot quote. The crew efficiently removed the old roof and installed the new one with great care, leaving everything spotless."
"Outstanding experience from start to finish. They communicated clearly throughout the process, finished on time, and left everything clean."
"SkyGuard replaced my shingle roof, including some rotten decking that was causing a leak. My roof is now in perfect condition!"
Common questions.
How much does a new roof cost in Davie?+
SkyGuard publishes flat rates that apply in Davie the same as everywhere else we work: architectural shingle from $6 per square foot, concrete or clay tile from $9, standing seam metal from $10, and metal slate from $12. On a typical 2,000 square foot roof that is $12,000 for shingle and $20,000 for metal, before deck replacement and permit fees.
Do I need a permit to replace a roof in Davie?+
Yes. Roofing is not exempt anywhere in Broward County, and an unpermitted roof will surface at your next sale or insurance inspection. We pull it through the Town of Davie Building Division as the licensed contractor of record under license CCC1336668, and the fee is itemised on your quote.
Is Davie in the High Velocity Hurricane Zone?+
Yes. Davie is in Broward County, one of only two Florida counties inside the HVHZ, so design wind speeds are 170 to 175 mph and every roofing product must carry a Miami-Dade Notice of Acceptance with TAS 201, 202 and 203 impact testing. There is also a mandatory in-progress inspection before the roof can be covered.
How long does a roof replacement take in Davie?+
Two to five working days on site for most single-family homes, with shingle fastest and tile or metal slate slowest. Add the permit ahead of that, typically 5 to 14 business days, so plan on two to three weeks end to end.
Free roof inspection in Davie
We measure the roof, photograph what we find, and give you an itemised written quote with the deck rate and permit fee stated up front.